I/O Servers | HSYCO Docs

📄️ Airzone

Airzone is a control framework for ducted air conditioning systems which allows for the control of several zones independently.

📄️ Alert5

Felma's Alert5 is a supervisor system that can control anti-intrusion, fire prevention, access control and TVCC systems. The communication with HSYCO is via HTTP protocol.

Arduino is a microcontroller platform and development tools combined into an easy-to-use, standardized and inexpensive architecture that can greatly enhance the physical input/output capabilities of HSYCO.

📄️ Arteco

Arteco Everywhere is a general purpose digital input-output Ethernet controller.

📄️ ArtecoOC

The ARTECOOC I/O Server can be used to interface HSYCO and the Arteco Next platform using the Arteco Open Connector SDK protocol.

📄️ Aton

Aton AH66T is a multi-zone audio system. The integration with HSYCO can be accomplished via direct control through the RS232 port on the module.

📄️ Ats

Aritech ATS (ATS 2010 ATS 3010 ATS 4010 ATS 4510) panels are multi-area intrusion detection systems. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the serial module. The ATS I/O Server supports the integration of more than one unit within the same HSYCO interface. This driver requires ATS firmware 4.0.19 or superior. The communication protocol must be unencrypted and the computer communication security password set to all zeros.

📄️ Avigilon

Avigilon Control Center (ACC) 7 is a video management software that can be integrated in HSYCO with a TCP/IP connection.

📄️ AvigilonAPI

Avigilon Control Center (ACC) 7 or Avigilon Unity are a video management software that can be integrated in HSYCO with a TCP/IP connection.

📄️ BACnetServer

BACnet is a protocol developed by ASHRAE for building automation and control networking, specifically designed to meet the communication needs of building automation and control systems for applications such as heating, ventilating, air-conditioning control, lighting control, access control and fire detection systems.

📄️ BACnet

📄️ Bentel

The Bentel KYO320 is an advanced, multi-area security system integrated HSYCO.

📄️ Boschfpa

The BOSCH FPA-5000 is a modular fire panel system.

📄️ Boschmap

The Bosch MAP panels are multi-area intrusion detection systems.

📄️ Contatto

The CONTATTO system is DUEMMEGI’s proprietary bus architecture for building automation. HSYCO fully integrates with this system through the MCP control and gateway module, and its FXP-XT serial communication protocol.

📄️ Cradlepoint

The Cradlepoint driver for HSYCO allows you to monitor the real-time status of the Cradlepoint IBR6xx series of routers.

📄️ CSx75

Aritech CSx75 is a multi-area security system. The integration with HSYCO can be accomplished via direct control through the RS-232 port on its panel.

📄️ DahuaAlarmHub

The DAHUAALARMHUB I/O Server allows HSYCO to receive alarms from and send commands to the Dahua Alarm Hub 2 security panel. Communication between HSYCO and the panel requires the SIA (Security Industry Association) protocol to be configured on the panel.

📄️ Daikin

Daikin air-conditioning systems in combination with the intelligent Touch Controller (iTC) or the intelligent Touch Manager (iTM) allow for remote control and supervision, via Ethernet communication, of the whole framework.

📄️ Daikinrc

The DAIKINRC I/O Server is compatible with the Daikin room air conditioner series CTXM, ATXM and FTXM units that can be fitted with the Daikin wireless LAN adapter (BRP06xxx; versions BRP069C4x are not supported) and are supported by the Daikin Controller iOS and Android app.

📄️ Dea Xensity

DEA XENSITY is a Point ID intrusion detection system using special piezoelectric sensors for the protection of doors, windows, glass surfaces, security grilles and walls.

📄️ Detnov

DETNOV are multi-area fire panels. The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection. This I/O server was developed following the MODBUS documentation MODBUS REGISTERS FOR DETNOV ADDRESSABLE SYSTEM VERSION 1.11 ENG

📄️ DIRIGERA

HSYCO integrates IKEA’s DIRIGERA hub, a smart home controller designed to unify control over IKEA smart devices such as lights, outlets, blinds, motion sensors, and more. Communication is conducted over the local network without requiring access to the IKEA cloud.

📄️ Domino

The DOMINO system is DUEMMEGI’s proprietary bus architecture for home automation. HSYCO fully integrates with this system through the DFCP or DFCP4 control and gateway module, and its FXP-XT serial communication protocol.

📄️ Duelux

DUELUX is a lighting system based on the DALI-2 industry-standard protocol for lighting control. HSYCO integrates this system and communicates with it through the DLCP or DLCP4 gateway modules via a TCP/IP connection.

📄️ Dummy

The DUMMY I/O Server is a virtual server that doesn’t actually connect to any external system, but simulates basic lighting and automation devices, and general purpose virtual data points.

📄️ Elmo

EL.MO. security panels are multi-area intrusion detection systems. The integration with HSYCO can be accomplished via direct control through the RS232 port on the panel. The panels supported are: ETR, Pregio, Vidomo, Proxima (FW ver >= 1.0.9) and Titania (This driver is also compatible with IESS ETR series)

📄️ Elsner

The Elsner P03/3-MODBUS is a solid-state weather station with a standard Modbus RTU slave interface. It measures temperature, wind speed and brightness (eastern, southern and western sun) and recognizes precipitation.

📄️ Enttec

Enttec DMX USB PRO is a USB DMX adapter that allows HSYCO to control any DMX-512 standard bus.

📄️ Esc/Vp

This I/O Server control SEIKO EPSON projectors which include a wide range of multi-source projectors remotely controllable via Ethernet, serial port, and USB connection.

📄️ Esser

ESSER 8xxx/IQ8/FlexES are multi-area fire panels. The integration with HSYCO can be accomplished using IBOX Modbus Server - ESSER gateway, a TCP/IP modbus interface. This I/O server was developed following the Modbus documentation ES-MN-18002-01-2, 11-2013.

📄️ ExoSensePi

Exo Sense Pi is a multi-sensor module with a Raspberry Pi 4 computing core and a wide range of connectivity options.

📄️ Fias

Oracle's FIAS (Fidelio Interface Application Specification) is a protocol specification used by different hospitality PMS systems to exchange data.

📄️ Fp2000

Aritech Interlogix FP2000 is a multi-area fire panel. The integration with HSYCO can be accomplished via direct control through the RS232 port on the panel.

📄️ Galaxy

The Honeywell Galaxy Dimension panels are multi-area intrusion detection systems.

📄️ Giacomini

The Giacoklima bus system equipped with the KM203 network controller allows for remote control and supervision, via Serial communication, of the whole heating/cooling framework.

📄️ Google Calendar

This driver allows for the use of Google Calendar as a scheduler.

📄️ Gsm

This I/O Server provides services for sending and receiving SMSs and events generation for incoming calls via GSM modem.

📄️ Guardall

Guardall QX32i, PX80 and PX500 are multi-area security systems. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the panel.

📄️ Heos

Heos by Denon comprises a set of HiFi audio systems integrated with HSYCO via WiFi or Ethernet connection. A single HEOS I/O Server controls all the devices connected to the local network.

📄️ Hephais

The SD3 HEPHAIS 1600 / DEF is a multi-zones fire panel. The integration with HSYCO can be accomplished via a standard Modbus RTU slave interface.

📄️ Hesa

Hesa Quaranta panels are multi-area intrusion detection systems.

📄️ Hid Edge Solo

The HID Edge Solo ESR40, ESRP40, ES400 are single-door IP access control solutions.

📄️ HSYCO Remote

The HSYCO Remote I/O Server is a powerful and secure server-to-server communication system that allows an HSYCO server read and write access to all the I/O data points and GUI variables of other remote HSYCO servers. It also supports near real-time replication of data loggers data from remote servers.

📄️ Hue

HSYCO integrates the Philips Hue wireless bulbs through their bridge device connected to the local network.

📄️ HwgIO

The HW group I/O Controller 2 is a general purpose digital input-output Ethernet controller, with 8 inputs and 8 outputs.

📄️ HwgMonitor

The HWGMONITOR I/O Server supports the following monitoring devices from HW group:

📄️ IFTTT

This I/O Server implements two-way communication with the Webhooks service of IFTTT, allowing HSYCO to trigger applets in IFTTT and, the other way around, to receive notifications and data from applets.

📄️ Inim

Inim SmartLiving panels are multi-area intrusion detection systems.

📄️ InimPrevidia

INIM PREVIDIA are multi-zone fire panels. The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection. This I/O server was developed following the MODBUS documentation: "INIM Guida all'integrazione con sistemi di supervisione"

📄️ InimPrime

INIM PRIME are multi-zone security panels. The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection. This I/O server was developed following the MODBUS documentation: "Modbus PRIME-3.00"

📄️ Iono

Iono is a general-purpose, professional input/output module based on a standard Arduino microcontroller.

📄️ IonoPi

Iono Pi is a versatile I/O module that combines several digital and analog input lines, power relay outputs and support for standard interfaces, typical of modern PLCs, with the powerful computing core of the Raspberry Pi.

📄️ IonoPiMax

Iono Pi Max is an extremely versatile industrial server with a huge variety of Input/Output lines and standard communication interfaces, all routed to the quad-core processor of the Raspberry Pi.

📄️ Kilsen

KILSEN KFP-A are multi-area fire panels. The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection. This I/O server was developed following the MODBUS documentation P/N 00-3243-505-1603-01 • ISS 14DEC15

📄️ Kissbox

KissBox DMX-512 is a Ethernet DMX adapter that allows HSYCO to control any DMX-512 standard bus.

📄️ KNX

The KNX I/O Server provides for the control of a KNX installation compliant with the KNX Standard version 2.0.

📄️ Ksenia

The KSENIA lares 16IP/48IP/128IP are multi-area security systems. The integration with HSYCO can be accomplished via direct control through Ethernet connection.

📄️ Lares4

The KSENIA lares 4.0 is a multi-area security system. The I/O Server has been tested on unit with firmware version 1.72.2. Actually this driver runs only in HTTP mode (port 80 is set by default).

📄️ LoRaWAN

The LoRaWAN I/O Server implements both a LoRaWAN Network and Application servers for the integration of a LoRaWAN 1.0.4 network.

📄️ MasterBus

MasterBus is a proprietary communication protocol used in a wide range of products from Mastervolt. It can be interfaced via the MasterBus Modbus Interface.

📄️ Mews

Mews is an Hotel management software that can be integrated in HSYCO with an API connection.

📄️ Mitsubishi

The Mitsubishi I/O Server can control air-conditioning devices connected to a Mitsubishi M-NET bus via a centralized controller and the Ethernet LAN.

📄️ Modbus Server

The Modbus Protocol is a messaging structure. It is used to establish master-slave/client-server communication between intelligent devices. It is a de facto standard. The Modbus RTU specification defines the default communication protocol over serial lines. The Modbus TCP/IP specification takes the Modbus instruction set and wraps TCP/IP around it.

📄️ Modbus

📄️ MPower

mFi mPower products are mFi controllable power outlets with Wi-Fi capability.

📄️ MQTTBROKER

This driver acts as an MQTT broker for Hsyco, it fully supports MQTT version 3.1.1. This broker is also ready to communicate with MQTT version 5.0 although full support to this version will be introduced later.

📄️ MQTTCLIENT

This driver acts as an MQTT client (publisher/subscriber) for Hsyco, it fully supports MQTT version 3.1.1.

📄️ MyHome

MyHome is a proprietary bus system for home automation developed by BTicino. HSYCO fully integrates with MyHome using the OpenWebNet (OWN) protocol.

📄️ Netatmo

This driver can read status and control Netatmo smart radiator valves and actuators using HTTPS protocol.

📄️ NETIO

This driver can read the status and send control commands to a NETIO power socket, using the HTTP JSON API protocol with basic authentication (username and password).

📄️ Networx

NetworX is a multi-area security system. The integration with HSYCO can be accomplished via direct control through their serial or ethernet interfaces.

📄️ NIKO

This driver acts as an MQTT client (publisher/subscriber) for HSYCO and establishes a connection with Niko Connected Controller in order to control Niko actions associated with lights and dimmers; it fully supports MQTT version 3.1.1. This driver uses Java methods from the library Eclipse Paho, version 1.2.2.

📄️ NMEA

The NMEA I/O Server implements a basic NMEA 0183 TCP client that connects to a NMEA 0183 source and receives all sentences, checking and discarding the checksum of valid messages, and ignoring invalid messages.

📄️ Notifier

The NOTIFIER AM-2000, AM-4000 and AM-6000 are multi-area fire panels. The integration with HSYCO can be accomplished via a standard Modbus RTU slave interface.

📄️ NotifierESibM

Notifier E-SIB-M is a license key to enable Modbus TCP communication for a series of Notifier and Honeywell fire detection panels:

📄️ Nuvo

NuVo Grand Concerto and Essentia E6G are multi-source, multi-zone audio distribution systems that may be integrated to work with external control systems and servers. The central unit is called Main Processor Unit (MPU).

📄️ Opera Cloud

Opera Cloud is an hotel management software that can be integrated in HSYCO with an API connection.

📄️ Paradox

PARADOX® EVO48, EVO192 and EVOHD are advanced, multi-area security systems integrated with a variety of wired and wireless sensors.

📄️ PowerOne

The Aurora Power-One inverters allow for remote supervision of the system providing with several measurement data. The integration with HSYCO allows for the visualization of such data and the creation of dynamic charts.

📄️ Protege

Protege is a server based architecture enabling you to securely manage, control and monitor a number of users, doors, areas, and other devices.

📄️ RACKPDU

The APC by Schneider Electric Rack Power Distribution Unit (PDU) may be used as a stand-alone, network- manageable power distribution device or up to four devices can be connected together using one network connection. The Rack PDU provides real-time remote monitoring of connected loads.

📄️ RayCONTROL

RayCONTROL 30 is the control unit for the FCC Planterm temperature control system.

📄️ Redscan

The OPTEX REDSCAN is a laser scan detector that can detect a moving object's size, speed, and distance with high-reliability. The integration with HSYCO can be accomplished via direct control through Ethernet connection.

📄️ Satel

The Satel INTEGRA series comprises a variety of multi-area security systems. The integration with HSYCO can be accomplished via direct control through Ethernet connection.

📄️ Shelly

HSYCO integrates Allterco's Shelly devices, a comprehensive range of WiFi-enabled smart home devices operating on 2.4GHz with IPv4 support. Each device offers a documented API.

📄️ SIACLIENT

The SIACLIENT driver implements a SIA (Security Industry Association protocol) client, following the DC-09 specification. It has been developed and tested with HSYCO acting as a SIA DC-09 client, sending messages to a SIA-compatible receiver. Compatibility with other SIA protocol variants is possible but not guaranteed.

📄️ SIASERVER

The SIASERVER driver implements a SIA (Security Industry Association protocol) server, specifically following the DC-09 specification. It has been developed and tested with HSYCO acting as a SIA DC-09 server, though compatibility with other SIA protocol variants is possible but not guaranteed.

📄️ Siemens Vanderbilt Edp

Siemens / Vanderbilt is a family of security panels compatible with the control protocol EDP (Vanderbilt/Siemens series 4000, 5000 and 6000) with firmware >= 2.3. This driver has been developed following the EDP protocol specification rev 2.2, 2012-11-12

📄️ Sigfox

Sigfox is a global network operator founded that builds wireless networks to connect low-power objects such as electricity meters and smartwatches, which need to be continuously on and emitting small amounts of data.

📄️ Sip

The HSYCO SIP I/O Server allows HSYCO to control standard VoIP client software (also called soft-phones), in order to integrate telephony features in HSYCO applications.

📄️ SMTPSERVER

The SMTPSERVER I/O Server implements a very basic Simple Mail Transfer Protocol (SMTP) server based on a subset of the RFC 821 standard. The SMTP I/O Server is not intended to be used as an ordinary SMTP server in the open Internet, but as an internal server, inside a protected network and not accessible from unknown clients, for SMTP-based M2M communication, or for testing purposes.

📄️ Sonos

Sonos comprises a set of HiFi audio systems integrated with HSYCO via WiFi or Ethernet connection. A single SONOS I/O Server controls all the devices connected to the local network.

📄️ SSH

Secure Shell (SSH) is a cryptographic network protocol for secure data communication, remote command-line login, remote command execution, and other secure network services between two networked computers that connects, via a secure channel over an insecure network, a server and a client (running SSH server and SSH client programs, respectively).

📄️ Strato

Strato Pi is an expansion board developed by Sfera Labs for the Raspberry Pi computer.

📄️ StratoPiMax

Strato Pi MAx is an extremely versatile Raspberry Pi CM4-based industrial controller, DIN rail mounted, with Wi-Fi and BLE wireless connectivity, dual Ethernet ports, dual SD, eMMC and SSD storage options and two USB ports. It supports up to four embedded expansion boards.

📄️ System

The HSYCO System Monitor I/O Server is used to monitor several key hardware and operating system parameters of an HSYCO server:

📄️ Tecnoalarm

The Tecnoalarm TP16-256, TP8-64BUS, TP8-96VIDEO, TP8-96GSM, TP16-512GSM, TP8-88, TP20-440, TP20-440EN, EV10-50 and EV12-150 are advanced, multi-area security systems integrated with a variety of wired and wireless sensors.

📄️ Tecnofire

The Tecnofire TFA1-298,TFA2-596 and TFA4-1192 are advanced, fire detection systems.

📄️ Teledata

Teledata Olympia are multi-zone fire panels. The integration with HSYCO can be accomplished via a standard Modbus TCP/IP connection using Teledata ONEconnect as gateway.

📄️ Telegram

This I/O Server allows you to implement a custom Telegram bot in HSYCO, for sending and receiving messages using the Telegram messaging service.

📄️ Texecom

The Texecom Premier Elite control panels are advanced, multi-area security systems. The integration with HSYCO can be accomplished via RS-232 serial communication or via Ethernet connection.

📄️ TLABQ

The T-LAB Q is a multi-area security system with four different models; the model Quadrio supports only one area, the models Small, Medium, Large support four areas. Each area is divided into four groups (A,B,C,D). Number of zones and outputs is variable and depend on the model.

📄️ Tridonic

Tridonic is a lighting system based on the DALI bus technology. HSYCO integrates this system and communicates with it through the DALI SCI2 interface module or DALI interface RS232 PS/S interface module and its communication protocol.

📄️ TSECMACS

The TSEC MACS is a perimeter anti-intrusion system for rigid and semi-rigid metal fences. The integration with HSYCO can be accomplished via a standard TCP/IP connection through the TSEC MACS ETH interface. This I/O server was developed following the TSEC MACS API 1.1.0.

📄️ VEDIRECT

VE.Direct is a simple, proprietary, communication protocol used in Victron Energy BlueSolar MPPT Charge 70/15 and the BMV-700 series battery monitors.

📄️ Vivaldifreenet

The Vivaldi Giove FREENET is an in-wall stand alone amplifier for multiroom audio applications, in a 503-3 modules standard case, and RS-485 control port.

📄️ Wolf8Access

HSYCO integrates the 8Access system by Wolf Safety through USB or Ethernet connection.

📄️ WXonline

This driver provides weather information and forecasts retrieved from OpenWeatherMap.

📄️ WXT520

The Vaisala WXT520 is a small and lightweight transmitter that offers six weather parameters in one compact package. WXT520 measures wind speed and direction, precipitation, atmospheric pressure, temperature and relative humidity.

📄️ Wyrestorm

The Wyrestorm MX-0808-PP, MX-0606-PP and MX-0404-PP modules are matrix switchers that allow any of their HDMI inputs to be routed over distance to any combination of their display outputs via a single UTP cable. The integration with HSYCO can be accomplished via direct control through the RS-232 port on the module.